Compiling tbaMUD under BSD
                  based on UNIX readme for circlemud
                            by Jeremy Elson 
                 For help, visit http://www.tbamud.com

Compiling tbaMUD is easy using FreeBSD.  If you plan on compiling on a 
FreeBSD machine, these instructions are for you.  If not, check the main 
README file to get a list of other operating systems that can be used to
compile and run tbaMUD.

Current versions of tbaMUD use the GNU 'autoconf' package to
automatically determine most of the important characteristics of your
system, so chances are good that tbaMUD will compile correctly on any
UNIX system -- even one that we have never seen before.  However, if you
do have problems, please visit http://www.tbamud.com so that we
can try to make tbaMUD work with your system.


1)  Download the latest version of tbaMUD.  You can always find the
    latest version at the following site:

        http://www.tbamud.com

		
2)  Unpack the archive.  If you have the .tar.gz version, uncompress it
    using gzip (GNU unzip) and the tar archiver.  (Both of these utilities
    can be downloaded from ftp.gnu.ai.mit.edu:/pub/gnu if you don't have
    them.)  To unpack the archive on a UNIX system, type:

        gzip -dc tbaMUD-xxxx.tgz | tar xvf -


3)  Configure tbaMUD for your system.  tbaMUD must be configured using
    the 'configure' program which attempts to guess correct values for
    various system-dependent variables used during compilation.  It uses
    those values to create a 'Makefile' and a header file called 'conf.h'.

    From tbaMUD's root directory, type

        ./configure

    If you're using 'csh' on an old version of System V, csh might try to
    execute 'configure' itself, giving you a message like "Permission denied"
    when you try to run "./configure".  If so, type "sh ./configure" instead.

    'configure' can take several minutes if you're using a slow computer.

    'configure' will attempt to use the 'gcc' compiler if it exists; if not,
    it will try 'cc'.  If you want to use a different compiler, set the
    'CC' environment variable to the name of the compiler you wish to use.

    For example, if you want to use the 'xlc' compiler, and your shell is
    csh or tcsh:

	setenv CC xlc
	./configure

    Or, if you want to use the 'xlc' compiler, and your shell is sh or bash:

	CC=xlc ./configure

    This will tell 'configure' to use the 'xlc' compiler instead of 'gcc'.


4)  Build the tbaMUD server.  This must be done from the 'src' directory.
    Type:
   
        cd src; gmake all

    This will build tbaMUD proper as well as its 10 or so ancillary
    utilities, which can take anywhere from 5 minutes to an hour depending
    on the speed of your computer.

    Note that in the future, when you need to recompile tbaMUD as you make
    changes to the code, it is NOT necessary to run 'configure' again (it
    should only be run once, after the first time you unpack tbaMUD from
    its .tar file).  If you move the source code to a different computer,
    you should reconfigure it by deleting the file 'config.cache' and
    running 'configure' again.

    The first time you try to compile tbaMUD, you will be asked to read the
    tbaMUD license.  Please read it!

	
5)  Go back to tbaMUD's root directory (by typing "cd ..") and run the
    tbaMUD server.  The easiest way to do this the first time is
    to use the 'autorun' script, which can be run in the background by
    typing:

        ./autorun &

    Make sure to do this in tbaMUD's root directory, not the src directory
    that you used for the previous step.  A file called 'syslog' will start
    growing in the same directory that contains tbaMUD's log messages.

    If you're using 'csh' on an old version of System V, csh might try to
    execute 'autorun' itself, giving you a message like "Permission denied"
    when you try to run "./autorun".  If so, type "sh ./autorun &" instead.

	
6)  Wait until the line 'No connections.  Going to sleep.' appears in the
    syslog.  This indicates that the server is ready and waiting for
    connections.  It shouldn't take more than about 30 seconds for the MUD
    to reach this state, though performance will vary depending on how fast
    your computer is.

    If a file appears called 'syslog.CRASH', the MUD has terminated
    (probably abnormally).  Check the contents of syslog.CRASH to see
    what error was encountered.


7)  Type 'telnet localhost 4000' to connect.  The first person to log in
    will be made an implementor (level 34) with all powers.


(write to help@tbamud.com for help)