# Makefile for TinyMUX 1.0 # # Search for the text 'CONFIGURATION SECTION' and make any changes needed # there. SHELL=/bin/sh srcdir = @srcdir@ VPATH = @srcdir@ BIN = ../game/bin CC = @CC@ # CPP = @CPP@ # This is broken in autoconf. Sigh. CPP = $(CC) -E LIBS = @LIBS@ LIBOBJS = @LIBOBJS@ # After we finish beta testing, we'll take away the debugging -g flag. # If you don't use GCC, don't use -g. Add -pg for profiling (gprof netmux # gmon.out) #OPTIM = -O #OPTIM = -g -pg -O OPTIM = -g -O # The first set of definitions is for disk-based caching. If you wish to be # memory based, comment the first set and uncomment the second set. Being # disk-based usually uses less memory, but more disk-space. Being memory # entails using more memory, less disk-space, and some gain in performance. BASED = UDB_S = udb_ocache.c udb_ochunk.c udb_obj.c udb_misc.c UDB_O = udb_ocache.o udb_ochunk.o udb_obj.o udb_misc.o UDB_INC = udb.h udb_defs.h #BASED = -DMEMORY_BASED #UDB_S = #UDB_O = #UDB_INC = # Uncomment these definitions to use radix tree string compression. This # will result in less memory usage in both memory and disk based schemes, # and reduced disk space as well when disk based. You MUST carefully read # README.COMPRESSION and follow the instructions exactly before you define # these, or you may cause damage to your database. # NOTE: You should have a fairly large database before you begin to use # radix compression. #COMPRESS_DEFS = -DRADIX_COMPRESSION #COMPRESS_LIB = -L./radixlib -lcompress # If we want to use the port concentrator, comment out the first set and # uncomment the second set of definitions. There is no need to use the # concentrator unless you run into problems with too many players being # online at once. # NOTE: This won't be enabled until patchlevel 1. DO NOT CHANGE. CONC_S = CONC_O = CONC_DEFS = #CONC_S = newconc.c #CONC_S = newconc.o #CONC_DEFS = -DCONCENTRATE # Malloc debugging options. The first set is with debugging off. # If you wish to use malloc debugging, comment the first set and uncomment # the second set. This should only be turned on if you're looking for memory # leaks or corruption, as it slows down the MUX considerably. MALLOC_S = malloc.c MALLOC_O = malloc.o MALLOC_DEFS = #MALLOC_S = malloc.c mcheck.c mstats.c mtrace.c #MALLOC_O = malloc.o mcheck.o mstats.o mtrace.o #MALLOC_DEFS = -DMCHECK -DMTRACE_FILE=\"mtrace.out\" # Standalone cache code. SA_UDB_S = udb_ocache.c udb_ochunk.c udb_obj.c udb_misc.c SA_UDB_O = udb_ocache.o udb_ochunk.o udb_obj.o udb_misc.o SA_UDB_INC = udb.h udb_defs.h # Source common to netmux and standalone code COM_SRC = COM_OBJ = # Everything needed to use the database in standalone mode. SA_SRC = sa-db.c sa-db_rw.c sa-boolexp.c sa-unparse.c \ sa-pred.c sa-stringu.c sa-conf.c sa-log.c sa-object.c \ sa-vattr.c sa-htab.c sa-player_c.c sa-flags.c SA_OBJ = sa-db.o sa-db_rw.o sa-boolexp.o sa-unparse.o \ sa-pred.o sa-stringu.o sa-conf.o sa-log.o sa-object.o \ sa-vattr.o sa-htab.o sa-player_c.o sa-flags.o # Distribution source files D_SRC = create.c game.c help.c look.c match.c move.c player.c predicates.c \ rob.c set.c speech.c wiz.c walkdb.c timer.c boolexp.c log.c cque.c \ unparse.c eval.c command.c wild.c netcommon.c functions.c vattr.c \ db.c db_rw.c stringutil.c object.c conf.c flags.c htab.c \ compat.c file_c.c player_c.c bsd.c alloc.c commac.c comsys.c mail.c \ macro.c mguests.c powers.c dspace.c newconc.c \ funceval.c D_OBJ = create.o game.o help.o look.o match.o move.o player.o predicates.o \ rob.o set.o speech.o wiz.o walkdb.o timer.o boolexp.o log.o cque.o \ unparse.o eval.o command.o wild.o netcommon.o functions.o vattr.o \ db.o db_rw.o stringutil.o object.o conf.o flags.o htab.o \ compat.o file_c.o player_c.o bsd.o alloc.o comsys.o commac.o mail.o \ macro.o mguests.o powers.o dspace.o newconc.o \ funceval.o D_INC = copyright.h flags.h help.h htab.h interface.h match.h functions.h \ command.h config.h db.h externs.h mudconf.h misc.h \ vattr.h file_c.h fifo.h alloc.h attrs.h commac.h comsys.h macro.h \ mguests.h powers.h dspace.h slave.h concentrator.h # Version number routine VER_SRC = version.c VER_OBJ = version.o VER_INC = patchlevel.h VER_FLG = -DMUX_BUILD_DATE="\"`date`\"" \ -DMUX_BUILD_NUM="\"`sh ./buildnum.sh`\"" # ===================== CONFIGURATION SECTION ==================== # # Select the correct C compiler. Whatever you choose, it must be able # to grok ANSI C (function prototypes) # #-----CC or GCC (must be able to grok function prototypes) # DEFS = # #-----CC on a NeXT system, really weird derivative of GCC # #DEFS = -DNEXT -DNEED_STRDUP # #-----GCC if the libraries were built for a pcc-derived cc compiler # (most systems) # #DEFS = -fpcc-struct-return -Wall # #-----GCC with GCC-compatible libraries if you want verbose error messages # #DEFS = -Wall # #-----HP-UX C compiler # #DEFS = -w +Obb800 -Aa -D_INCLUDE_POSIX_SOURCE -D_INCLUDE_HPUX_SOURCE -D_INCLUDE_XOPEN_SOURCE # #-----MIPS C compiler (also DEC 3xxx, Prime EXL7xxx) # #DEFS = -signed # #-----Solaris. # #DEFS = -I/usr/ucbinclude -DSOLARIS # # Libraries. Use the second line if you want to use the resolver to get # hostnames and your libc doesn't use it already. If you use it, you'd # better have your nameserver working or things may hang for a while when # people try to login from distant sites. Use the third line if you're running # on a SysV-ish system and BSD support isn't built in to the standard libc. # MORELIBS = -lm #MORELIBS = -lm -lnsl -lsocket -L/usr/ucblib -lucb # Mips #MORELIBS = -lm -L/usr/ucblib -lucb # Solaris # Select the networking support you have. Currently only BSD networking # is supported. # # ----- BSD networking NET_S = bsd.c NET_O = bsd.o # ================== END OF CONFIGURATION SECTION ================= # Auxiliary source files: only used by offline utilities. AUX_SRC = dbconvert.c mkindx.c unsplit.c LIB_SRC = LIB_INC = DEBUG = $(OPTIM) ALLCFLAGS = $(CFLAGS) $(DEBUG) $(DEFS) $(COMPRESS_DEFS) $(BASED) $(MALLOC_DEFS) $(CONC_DEFS) $(MOREDEFS) $(RLIM_F) #Auxiliary files A_INST = README NOTES HIGHLIGHTS CREDITS CHANGES A_TXT = badsite.txt connect.txt create_reg.txt down.txt guest.txt help.txt \ motd.txt news.txt newuser.txt quit.txt register.txt wizhelp.txt \ wizmotd.txt full.txt plushelp.txt wiznews.txt A_SH = db_load db_unload db_check buildnum.sh A_RT = Startmux mux.config A_CONF = netmux.conf alias.conf compat.conf A_MISC = buildnum.data A_VMS = vms_dbm.c vms_dbm.h startmux.com compile.com link.com A_AUTO = configure configure.in autoconf.h.in Makefile.in .depend AUXIL = $(A_INST) $(A_TXT) $(A_SH) $(A_CONF) $(A_MISC) $(A_RT) $(A_VMS) \ $(A_AUTO) #Installation files INSTALL_PROG = Startmux netmux dbconvert mkindx db_load db_unload db_check $(R_SERV) INSTALL_TARG = $(INSTALL_PROG) *.txt *.conf REINSTALL_TARG = $(INSTALL_PROG) help.txt wizhelp.txt alias.conf compat.conf #compiliation source files ALLSRC = $(D_SRC) $(UDB_SRC) $(UDBA_SRC) $(UDBO_SRC) $(VER_SRC) \ $(COM_SRC) $(SA_SRC) $(AUX_SRC) $(LIB_SRC) ALLINC = $(D_INC) $(UDB_INC) $(VER_INC) $(NET_INC) $(LIB_INC) SRC = $(D_SRC) $(COM_SRC) $(UDB_S) $(MALLOC_S) $(CONC_S) OBJ = $(D_OBJ) $(COM_OBJ) $(UDB_O) $(MALLOC_O) $(CONC_O) # Files in the standard distribution DIST = $(ALLSRC) $(ALLINC) $(AUXIL) OUT = netmux mkindx dbconvert .c.o: $(CC) $(ALLCFLAGS) -c $< # paths is likely to remain broken #all: conc slave $(OUT) all: slave $(OUT) TAGS: *.c *.h etags *.c *.h #conc: portconc.o # $(CC) $(ALLCFLAGS) $(LIBS) -o conc portconc.o slave: slave.o $(CC) $(ALLCFLAGS) $(LIBS) -o slave slave.o mkindx: mkindx.o $(CC) $(ALLCFLAGS) -o mkindx mkindx.o unsplit: unsplit.o $(CC) $(ALLCFLAGS) -o unsplit unsplit.o dbconvert: dbconvert.o $(SA_OBJ) $(SA_UDB_O) $(ALLOC_O) $(LIBOBJS) $(CC) $(ALLCFLAGS) -o dbconvert dbconvert.o $(SA_OBJ) $(COM_OBJ) $(SA_UDB_O) $(ALLOC_O) $(LIBS) $(COMPRESS_LIB) $(MORELIBS) $(LIBOBJS) saber: $(SRC) #load $(SRC) saber-o: $(OBJ) $(LIBOBJS) #load $(OBJ) $(VER_OBJ) $(LIBS) $(MORELIBS) netmux: $(OBJ) $(LIBOBJS) $(CC) $(ALLCFLAGS) $(VER_FLG) -c $(VER_SRC) -mv -f netmux netmux~ $(CC) $(ALLCFLAGS) -o netmux $(OBJ) $(LIBOBJS) $(VER_OBJ) $(LIBS) $(COMPRESS_LIB) $(MORELIBS) dist.tar.Z: $(DIST) -rm -f buildnum.data echo 0 > buildnum.data tar cvhf - $(DIST) | compress -c > dist.tar.Z.NEW mv dist.tar.Z.NEW dist.tar.Z depend: $(ALLSRC) unsplit for i in $(D_SRC) $(COM_SRC) $(SA_SRC) $(UDBA_SRC) $(UDBO_SRC) $(AUX_SRC) $(LIB_SRC) $(MALLOC_S) $(CONC_S) slave.c portconc.c ; do $(CPP) $(ALLCFLAGS) -M $$i; done | sed -e 's:/usr[^ ]* ::g' | unsplit > .depend~ mv .depend~ .depend index: help.indx news.indx wizhelp.indx help.indx: help.txt ./mkindx help.txt help.indx news.indx: news.txt ./mkindx news.txt news.indx wizhelp.indx: wizhelp.txt ./mkindx wizhelp.txt wizhelp.indx verify: runtest --tool mux --src ./testsuite realclean: -rm -f *.o a.out core gmon.out mux.*log mux.*sum $(OUT) netmux~ clean: -rm -f *.o a.out core gmon.out mux.*log mux.*sum slave conc $(OUT) indent: indent -bad -bap -cdb -nsob -fca -sc -br -ce -ss -npcs -nbc -lp -i8 -ip0 -cp5 -ncs -npsl -di1 *.c radixlib/*.c tools/*.c web/*.c include .depend